{"product_id":"3d-pen-kit-nz-pla-printing-pen-lcd-40-colours-200m","title":"3D Pen Set with LCD NZ — Kids PLA + ABS + 40 Colours Filament (200m), Ages 8+, Value Pack","description":"\u003cp\u003e\u003cstrong\u003eThe biggest variety pack in our high-temp 3D pen range.\u003c\/strong\u003e Pair the high-temp PLA\/ABS 3D printing pen with \u003cstrong\u003e40 colours\u003c\/strong\u003e of 1.75mm PLA filament — 200m of vibrant material to draw rigid, sturdy 3D models that hold their shape.\u003c\/p\u003e\n\n\u003ch3\u003eWhy a high-temp PLA pen?\u003c\/h3\u003e\n\u003cp\u003eThis is our \u003cstrong\u003ehigh-temperature pen for older kids and beginners\u003c\/strong\u003e. PLA filament melts at 175–195°C and ABS at 200–220°C — much hotter than our PCL pens (60–100°C), but the trade-off is worth it for the right age group: \u003cstrong\u003ePLA models are stronger, glossier, and stay rigid\u003c\/strong\u003e rather than slightly bendable. Perfect for architectural builds, jewellery, ornaments, name tags, and any 3D model that needs to hold its shape under handling.\u003c\/p\u003e\n\n\u003ch3\u003eFor ages 8+ with adult supervision\u003c\/h3\u003e\n\u003cp\u003eBecause the nozzle reaches up to 220°C, this pen is best for \u003cstrong\u003echildren 8 years and older\u003c\/strong\u003e with a parent or older sibling nearby. Two finger stall thimbles are included for heat-protected grip. If you're shopping for younger kids (5–7 years), our cordless or PCL pen kits are a better starting point — those run at 60–100°C.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3D printing pen\u003c\/strong\u003e with LCD display, adjustable temperature, PLA + ABS dual modes, 3 speed settings, one-key load\/unload\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e40 colours of 1.75mm PLA filament\u003c\/strong\u003e — 40 individual 5m strands, 200m total\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2× finger stall thimbles\u003c\/strong\u003e (heat-resistant grip protection)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePen holder\u003c\/strong\u003e (keeps the hot pen safely upright when not drawing)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB power cable\u003c\/strong\u003e (5V \/ 2A — plug adapter not included)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePVC drawing board\u003c\/strong\u003e (smooth surface that filament releases from cleanly)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSample PLA filament\u003c\/strong\u003e for first prints\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e12-pattern instruction guide\u003c\/strong\u003e (kid-friendly templates to trace)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eUser manual\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePen features at a glance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLCD display\u003c\/strong\u003e shows current temperature, speed and mode\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePLA mode\u003c\/strong\u003e (175–195°C) for everyday colours and stronger pieces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eABS mode\u003c\/strong\u003e (200–220°C) for high-strength prints (optional, advanced)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3 speed settings\u003c\/strong\u003e (S-1 slow, S-2 medium, S-3 fast)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne-key load and unload\u003c\/strong\u003e filament — no fiddling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB powered\u003c\/strong\u003e — works with a power bank for portable, cordless-feel drawing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to use — 5 simple steps\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003ePlug in the pen via USB (use a power bank for portable use)\u003c\/li\u003e\n  \u003cli\u003eSelect \u003cstrong\u003ePLA mode\u003c\/strong\u003e and your preferred speed\u003c\/li\u003e\n  \u003cli\u003eWait for the LCD to show the ready temperature (~30–60 seconds)\u003c\/li\u003e\n  \u003cli\u003ePush a 5m PLA filament strand into the back of the pen and press the \u003cstrong\u003eload\u003c\/strong\u003e button\u003c\/li\u003e\n  \u003cli\u003eStart drawing — flat shapes on the drawing board first, then peel and assemble\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eFilament compatibility — IMPORTANT\u003c\/h3\u003e\n\u003cp\u003eThis pen uses \u003cstrong\u003e1.75mm PLA\u003c\/strong\u003e (and ABS) filament — it does \u003cstrong\u003eNOT\u003c\/strong\u003e work with PCL filament. If you already own PCL filament from one of our other 3D pens, please don't load it into this pen — PCL melts at 60–100°C and will overheat and char in this high-temp pen. Refill with any standard \u003cstrong\u003e1.75mm PLA\u003c\/strong\u003e filament when you run out.\u003c\/p\u003e\n\n\u003ch3\u003eSafety + adult supervision\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePen nozzle reaches up to 220°C\u003c\/strong\u003e — adult supervision is required\u003c\/li\u003e\n  \u003cli\u003eUse the included \u003cstrong\u003efinger stalls\u003c\/strong\u003e for heat-protected grip\u003c\/li\u003e\n  \u003cli\u003eKeep the pen on its included \u003cstrong\u003estand\u003c\/strong\u003e when not in use\u003c\/li\u003e\n  \u003cli\u003eDo not leave the pen heated and unattended\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eRecommended for ages 8+\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy a 40-colour value bundle?\u003c\/h3\u003e\n\n\u003ch3\u003eSpecs at a glance\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePen material\u003c\/th\u003e\n\u003ctd\u003ePLA + ABS dual mode\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFilament accepted\u003c\/th\u003e\n\u003ctd\u003e1.75mm PLA (also accepts ABS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint temperature\u003c\/th\u003e\n\u003ctd\u003e175–220°C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSpeed settings\u003c\/th\u003e\n\u003ctd\u003e3 (S-1, S-2, S-3)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eLCD (shows temperature, speed, mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eMini USB (5V \/ 2A) — power bank, USB or wall plug adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours included\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLength per strand\u003c\/th\u003e\n\u003ctd\u003e5m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTotal filament\u003c\/th\u003e\n\u003ctd\u003e200m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended age\u003c\/th\u003e\n\u003ctd\u003e8+ with adult supervision\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Happy Kid","offers":[{"title":"Default Title","offer_id":42200269455415,"sku":"3D-PEN-B661-40S","price":89.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/4530\/6167\/files\/3d-pen-kit-b661-40-colours-200m-bundle-hero-boy-3d-models.jpg?v=1777200594","url":"https:\/\/www.happykid.co.nz\/products\/3d-pen-kit-nz-pla-printing-pen-lcd-40-colours-200m","provider":"Happy Kid","version":"1.0","type":"link"}